A new generation of digital stepping closed-loop driver
User manual
[Please read this manual carefully before use to avoid damage to the drive]
1. Introduction
The new generation DSP digital stepping closed-loop driver adopts advanced vector closed-loop control technology,
Thoroughly overcome the problem of lost steps of traditional open-loop stepper motors, and significantly improve the high-speed performance of stepper motors,
Reduce the degree of heating of the motor and reduce the vibration of the motor, and further improve the working speed and accuracy of the equipment,
Reduce equipment energy consumption. In addition, when the motor is continuously overloaded, the driver will output an alarm signal, which has the same reliability as the AC servo system. The suitable motor installation size is the same as the traditional (57/60) and 86
Series stepper motors are fully compatible, and the traditional open-loop stepper drive scheme can be seamlessly upgraded.
The flow servo system has a very high cost advantage.
This driver is suitable for all kinds of small and medium-sized automation equipment and instruments, such as: woodworking engraving machine, wiring harness
Processing machines, laser cutting machines, high-speed plotters, small CNC machine tools, automated assembly equipment, etc. In need
The application effect is particularly good in equipment with low noise, stable operation and high-speed response.
Technical characteristics
Adopt a new 32-bit motor control dedicated DSP chip;
Adopt advanced vector type closed loop control technology;
LED digital tube display with key operation, intuitive and clear, easy to operate;
The quiescent current and dynamic current can be set arbitrarily (within the range of 0---8.2A);
Can be adapted to drive (57/60) and 86 series hybrid closed-loop stepper motors;
Photoelectric isolation signal input/output; pulse response frequency up to 200KHz;
Provide 16 general-purpose subdivision options, with a maximum of 256 subdivisions (51200 pulses/revolution);
Provide electronic gear matching with various pulse sources (any subdivision value);
With overcurrent, overheating, overvoltage and tracking error out of tolerance protection;
Position control mode and speed control mode are optional;
Note: Keep good heat dissipation of the drive
(1) The reliable working temperature of the drive is usually within 60℃, and the working temperature of the motor is within 80℃;
(2) When installing the drive, please try to install it upright and sideways, away from heat sources, and not blocking the air duct of the fan. If necessary, install a heat dissipation and ventilation fan on the electrical cabinet where the drive is installed, so that the air inside and outside the electrical cabinet is convective to ensure that the drive works within a reliable operating temperature range.
The factory default current loop parameters, speed loop parameters and position loop parameters of the drive are the most
The customer generally does not need to modify the parameters. If the customer's application environment is special, it can be repaired under the guidance of professionals
Change the * parameter to achieve the best use effect.
Brand Name:None
Motor Type:Stepper Motor
Certification:CE
Origin:CN(Origin)
Power Supply:DC
Model Number:86 Digital Display HBS860H
