Check your device's Frequency and IC chip model before buying
Must meet the following three conditions:
1. You must have a good remote controller. (Or will copy the bad command, can't work)
2. You need to know the device frequency and IC chip model of your current remote controller.
3. This remote controller is mainly suitable for rolling doors, retractable doors, Road gates, etc.
For example: open your remote controller and check the device frequency 433, the IC chip model is 2264, and you also have a usable remote controller, which will be ok to choose this product.
* Multi-functional and multi-variable, personalized and user-friendly, simple design, and fast to use.
* This smart copy remote control is suitable for electric door remote control, telescopic door remote control, and garage door remote control.
* 2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630,HCS101, HCS200\HCS201(part code), part single chip microcomputer.......... and so on. Different chip manufacturers have different prefixes for chip models, as long as the digital portion of the chip can be the same model.
Note: We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. When copying a rolling code chip remote control, it is not possible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the rolling code remote control.
RF frequency type: 315/433
Duplicate Your Existing Remote Controllers so you always have a backup:
1. Vehicle central locking systems
2. Garage doors
3. Electronic gates
4. Electrical appliances/Home automation i.e., lights
5. Car sunroofs
6. Car/Motorbike alarms
Specifications:
Operating Current: ≤12mA
Operating frequency: 433.92Mhz
Transmitting power: ≥10mW
Transmission Distance: 50 meters (open)
Frequency deviation: ± 0.2MHz
Transfer rate: 50--60KHZ
Working temperature: -20~70℃
Storage temperature: -10~ 50℃
Humidity: 85% or less
Package Included:
1*Remote Control
How to use the remote control
1. Code clearing method:
At the same time, press and hold the two keys of unlock and unlock (some shells have two keys of up and down), and the LED indicator enters the fast flashing state. At this time, all the data in the memory is cleared. After clearing the data, the remote control will not light up, no matter which key is pressed.
2. Copy method:
One hand holds the original remote control, and the other hand holds the copy remote control. The two remote controls should be as close as possible. Press the keys required for the copy, respectively, and the LED indicator will flash quickly after flashing. The copy is successful. The other key operation methods are the same. Some remote controls have low transmission power, so the original remote control and the copy remote control should be operated back-to-back to make the copy. If there is interference in some operating environments, the interference operation should be avoided. If the copy is not easy to use, the copy should be repeated after the code is cleared. (Especially important: the remote control in your hand must work normally and have the same frequency as our remote control)
