Features:
--Stainless Steel Water Distiller Machine for Home Hospital Lab Office,
--Easy to operate, no installation required,
--Produces water of the safest and cleanest condition,
--Seamless round shaped exterior,
--Durable, yet lightweight and compact enough to travel with,
--Effectively removes most tap water impurities,
--Water bottle included.
Specifications:
Rated voltage: 220V
Rated frequency: 50HZ
Power rating: 750W
Volume: 4L
Degree of evaporation:1L/H
Over-temperature safe: cut off at temperature of 160°C.
Set up:
1. Place top cover on the machine body and make sure the silicon seal is correctly in place around the entire rim.
Make sure the unit is on a stable surface . Then plug the power wire of the top cover into the machine's body.
2. Set up storage bottle; Connect the main power wire with machine body and plug in the electric outlet.
press ""Starting Button"", the fan and distilling process will begin.
3. Water will begin to drip into the storage bottle after approximately 30 minutes. It will take approximately 4 hours
to distill 4 Liters of water(depend on local environment and temperature). The unit will automatically shut down when the process is finished.
4. After water bottle is fully filled with distilled water, but starting button still in power. For safety sake,
please let the wole distiller cool down first and take offf the top cover after 10 minutes and refill the tank
with water, put the top cover back stably and connect the powr wire, the distiller is reliable and safe under 24hrs process.
5. Don't drink the first bottle of the stilled water. It will take on distilling cycle for the unit to do self-cleaning.
Package Included:
1x Distiller
1x Water bottle
1x Discharge cap
1x Bottle cap
1x Filter
1x Main power wire
1x Chanmer cleaning powder
1x Instruction Manual
Note:
1. Plaese read the instructions carefully before use.
2. Please allow 1-2cm errors due to manual measurement.
3. Due to the difference between different monitors, the pictures may not reflect the actual color of the item.
Prompt:
After each use of the machine, scale will be left in the stainless steel liner. If you do not clean the scale, it will build up and stick to the stainless steel part of the head cover by steam. Customers are advised to purchase food-grade citric acid cleaning agent by themselves, and pour a small amount of water after each use, as long as it covers the scale, then put 2 spoons of cleaning agent, do not cover the head cover, start the machine and cook for a few minutes,the scale will fall naturally.Then turn off the power supply, and then rinse with water after cooling.
