G1/2 Thread Angle Valve Stainless Steel Water Stop Valve for Bathroom Toilet SuppliesSingle Hot

Feature: 1. The high?temperature baking paint process is fashionable and elegant, which can protect the product from scratches and prevent the paint from falling off. 2. High?quality 304 stainless steel material, one?piece thick casting, high pressure resistance, explosion?proof. 3. Pure copper ceramic valve core, high and low temperature resistance, corrosion resistance, high sealing performance, environmental protection and no leakage. 4. Standard caliber fine thread, standard G1/2 connection caliber, CNC tight thread, tightly stitched links, no slippage and no leakage. 5. Wide application, suitable for many occasion, such as kitchen, basin, toilet, water heater, etc. Specification: Item Type: Angle Valve Color: Black Angle Valve Height: Approx.8.5cm/3.3in Gasket Size: Approx.5cm / 2.0in Thread Size: Approx.2cm / 0.8in Weight: Approx.136g/4.8oz Body Material: 304 stainless steel Spool Type: Pure copper valve core Functional Characteristics: Thickened one-piece casting Surface technology: black paint Connection Caliber: Standard G1/2 caliber Application: Kitchen/bathroom/balcony, etc. Applicable Water Pressure: 0.05-1.5MPA Installation Steps: 1. Lay the inlet pipe at a suitable height on the wall. 2. Wrap the thread around the PTFE Tape, put it into the decorative cover, and screw it into the water inlet pipe. 3. Use a screwdriver to insert the water outlet and screw the water inlet end into the wall water inlet pipe. 4. Connect the pipeline water source and check whether the threaded part is sealed. . Package List: 1 x Angle Valve1 x Gasket Note: Installation Precautions:1. Before installation, drain water to thoroughly flush the sand and dirt in the water pipe to ensure that the pipe is clean;2. Wrap a proper amount of PTFE Tape on the front thread of the angle valve during installation to adjust the angle of use of the angle valve;3. Tighten it in a clockwise direction by hand first, then use a wire blasting knife to insert the water outlet, and turn it in a clockwise direction to tighten;4. Do not use a wrench to jam the threaded port of the angle valve to avoid damage to the product caused by improper installation.