Sinus Rinse Refills Powder (250 packets)

Ingredients: Sachet: 96% sodium chloride, 4% sodium bicarbonate. Cautions (Disclaimer) ＞ Please Read [Important] Do not use if you have otitis media. / Boil tap water and allow it to cool before use. 1. Check the bottle for scratches or defects before use. 2. If you experience pain, discontinue use immediately and consult a specialist. 3. If you have severe nasal or ear inflammation, consult a specialist before use. 4. If you have had nasal or ear surgery, consult your doctor. 5. Keep out of reach of children. 6. Always use the Neilmed bottle when using premixed sachets. 7. Use purified water or boiled water at body temperature before use. 8. Do not share the bottle with others as it may cause infection. 9. Store the bottle in a clean place and replace it every three months for hygiene. 10. Do not blow your nose too hard after use. 11. The residual rinse solution in the nasal passages may flow out slightly after some time has passed. Product Introduction: Sinus Rinse is a saline-based nasal rinse. This pre-mixed sachet contains approximately 96% sodium chloride and 4% sodium bicarbonate, and is mixed with 240mL of water to create a rinse solution. By gently squeezing the bottle container (sold separately), the rinse solution is sprayed from the tip of the cap into the nasal passages, washing away debris, dust, and pollen. To maintain daily health, we recommend nasal rinse once or twice a day. What makes the NeilMed Sinus Rinse Kit so great: 1. The rinse solution is similar to body fluids, so it won't leave a stinging feeling. 2. The single-use pre-mixed sachet is simple and convenient. 3. The uniquely designed bottle shape makes it easy to use with one hand. 4. The generous amount of rinse water gently and thoroughly rinses the nasal passages. ■How to Use: 1. Open the cap of the bottle (sold separately). 2. Boil tap water and allow it to cool to body temperature (36°C). Prepare purified water and warm it to about body temperature (36°C). (You can also use a microwave.) 3. Add the powder (1 packet) to 240 mL of purified water (boiled water) at the appropriate temperature and dissolve it completely to create the cleaning solution. 4. Attach the cap tightly to the bottle. 5. Bow your head. While breathing through your mouth, slowly squeeze the bottle to release the solution, allowing it to flow out of the other nostril. 6. Using about half of the remaining solution, repeat the process with the other nostril. Finally, gently blow your nose. ■ Cleaning Instructions 1. After use, discard the remaining solution and rinse the bottle, cap, and tube under running water. 21. Fill the bottle with water and shake the capped bottle vigorously. *Hold the tip of the cap with your fingers to prevent the water from splashing out. 3. Press the bottle firmly to clean the inside of the tube and cap. Be sure to remove any salt from the sachet. *Cover the tip of the cap with your palm to prevent water from splashing. 4. Empty the bottle, remove the cap, and dry each piece using a glass holder or similar to drain the bottle. If the bottle is very dirty, fill it with water, add a few drops of dishwashing detergent, and repeat step 3. After cleaning, rinse thoroughly to ensure that no detergent residue remains.