[Light Claw] This smartphone holder features a reinforced plastic base while retaining the design of a metal claw. Push up the upper arm with your smartphone to attach and detach it. Guide arms on both sides make it easier to aim at the center and prevent lateral movement. The height of the lower arm and claws cannot be adjusted. A dial on the back locks the arm in place to prevent it from opening up during impacts. The standard Air Mount features an air suspension-like air cap that floats the holder, efficiently absorbing high-frequency vibrations from the engine and reducing the risk of damage to the smartphone camera's image stabilization. It provides better vibration reduction than a separate vibration absorber, while also improving stability over bumps and other uneven surfaces. The KDR-M25 model is recommended for those who find the high price of metal claws prohibitive, find the square protrusions on smartphone cases to be a nuisance, or prefer the Air Mount.
[Compatible models] iPhone 15 / 15Pro / 15Pro Max / 15Plus / 14 / 14Plus / 14pro / 14promax / 13ProMax / iPhone 13Pro / 13 / 13mini / 12Pro / 12 / 12ProMax / 12mini / SE3 / SE2 / 11 / 11Pro / 11ProMax / X / XS / XR / XS Max / 8 / 8 Plus / 7 / 6 / Samsung Galaxy / Google Pixel / Kyocera Torque / Sony Xperia / Sharp Aquos, and others.
*Please check the actual size, including the requirements for smartphone accessories such as cases. This requirement is for compatibility with the hold, not camera exposure. ■ Height: 120-168mm, Width: 63-87mm (Please make sure your smartphone model size is within the range.) ■ Thickness: 17mm or less (Please be careful with thick smartphone models and cases.) ■ Excellent compatibility, as it can accommodate thicknesses up to 17mm without affecting smartphone cases or phone holder rings. ■ As a precaution, we recommend using the safety strap KDR-SFB-S or a carabiner to connect the handle after setting up the holder to protect against unforeseen circumstances.
[1-inch ball mount and intermediate mount] The mount is made of aluminum alloy, which is strong and resistant to deterioration. Two joints allow for flexible adjustment of the holder position. The aluminum intermediate mount has a theft-proof structure and cannot be loosened without using the included SST. While it is completely fixed, once tightened, the angle cannot be adjusted.
[Product Specifications] ■Holder size: Height 120-168mm, Width 63-87mm, Thickness 17mm ■Material: Aluminum alloy (holder surface/mount) + Reinforced plastic PA66+GF ■Weight: 232g ■Set contents: Main unit (1-inch ball), bar mount (1-inch ball/32mm/15mm width), diameter conversion attachment (12/22/25.4mm), 2mm rubber tape, hex wrench, 60mm intermediate mount security type (SST included) ■Instruction manual (online only): As part of our decarbonization efforts to reduce our environmental impact, we have refrained from including a paper manual. You can view or download the instruction manual from each product page on the Kaedear official website. ■Brand: Kaedear
[Manufacturer's Warranty] ■ Manufacturer's warranty period: 1 year (expires on the same day as the date of purchase) At Kaedia, we provide after-sales support to ensure customer satisfaction. Our nationally certified staff will provide expert advice on product and motorcycle installation, and we'll be happy to assist you with any questions you may have. In the unlikely event that a defect is diagnosed as being due to a product defect, we will review the matter in accordance with our manufacturer's warranty regulations and provide a free repair or replacement under the manufacturer's warranty. For commercial use, the manufacturer's warranty period will be halved (e.g., if the manufacturer's warranty period is 1 year, it will be reduced to 6 months, expiring on the same day as the date of purchase). For details, please see the manufacturer's warranty regulations on our official website. We also provide support after installation and use. As a Japanese manufacturer, we offer customer service with a heartfelt hospitality. Please feel free to contact us.
[Light Claw] This smartphone holder features a reinforced plastic base while retaining the design of a metal claw. Push up the upper arm with your smartphone to attach and detach it. Guide arms on both sides make it easier to aim at the center and prevent lateral movement. The height of the lower arm and claws cannot be adjusted. A dial on the back locks the arm in place to prevent it from opening up during impacts. The standard Air Mount features an air suspension-like air cap that floats the holder, efficiently absorbing high-frequency vibrations from the engine and reducing the risk of damage to the smartphone camera's image stabilization. It provides better vibration reduction than a separate vibration absorber, while also improving stability over bumps and other uneven surfaces. The KDR-M25 model is recommended for those who find the high price of metal claws prohibitive, find the square protrusions on smartphone cases to be a nuisance, or prefer the Air Mount.
Rambursare în caz de nelivrare
