Feature:
1. Provide overload protection, leakage protection, over and under voltage protection, and over voltage recovery. And to prevent closing in the event of a fault, safer to use, and has the function of anti‑magnetic interference
2. The shell and parts are made of high flame retardant, high pressure resistant and impact resistant plastic
3. The circuit can be quickly opened to ensure the safety of electricity, the contacts of the circuit breaker are always in a completely open or closed state to avoid the contact staying in the middle of the opening or closing action due to the fault to cause a safety incident
4. There is a red control signal status light on the front of the product. When the voltage reaches the rated closing voltage, the status light is on; when the voltage is less than the rated voltage, the status light is off to identify the current control state of photovoltaic reclosing
5. The circuit breaker has a fast closing function. Avoid the adverse effects of the hand driven speed of the circuit breaker during automatic reclosing and opening, thereby prolonging the service life of the product
6. With electricity closing, no electricity opening; Provide convenient installation, the size of the width is 36mm single pole, the height of the control part and the circuit breaker part are the same, guide rail type installation is easy to interchange
Specification:
Item Type: Leakage Protection Switch
Rated Current (IN): 1A 63A (adjustable)
Rated Voltage: AC220v
Number of Poles: 1P+N
Width: Approx. 36mm 1.4in
Automatic Closing Delay Time: less than 30S
Automatic Opening Delay Time: less than 4S
Undervoltage Protection Action Time: 2 5S
Overvoltage Protection Action Time: 2 5S
Setting Range of Undervoltage Protection: AC150V 190V
Overvoltage Protection Setting Range: AC 250V 300V
Leakage Protection Setting Range: 10mA 99mA adjustable
1. Operate on the Measurement Interface:
(1) Long press the Set Switch key for 3S.
(2) Short Press the Set Switch Key: You can view the current voltage(220V), current (63A), leakage current (90mA); if 10S no operation, automatically return; Back to the voltage display interface.
(3) Short Press the clear query Button: You can view the total faults number of times in turn (at this time, overvoltage undervoltage overcurrent leakage indicators are at the same time
on, overvoltage, undervoltage, overcurrent, leakage; Failure Times: If 10s without operation, it will automatically return to the voltage display interface.
(4) Long Press the clear query Key for 5S: Clear all faults times.
(5) Short Press the Δ Mute Key: Can mute the buzzer sound.
(6) Short Press the test Button: Perform leakage function test.
2. Operate in the Setting Interface:
(1) Short Press the Set Switch Key: Switch and set the overvoltage setting value, undervoltage setting value, overcurrent setting value, and leakage setting value in turn.
(2) Short Press the Δ silence Key: You can adjust the currently set value increase.
(3) Short Press ▼ : You can decrease the currently set value.
(4) Long Press the Set Switch Key: Exit the parameter setting. ; When the automatic reclosing power supply protector wiring is installed correctly, please connect the power supply. Turn on the master control switch , and the automatic reclosing power protector will immediately turn on the circuit. Press the Test button, the auto reclosing power protector will cut off the circuit, and the leakage indicator will be on, and the power will be restored automatically after 30 seconds. This means that the auto reclosing power protector is working properly. At this point, you have correctly installed the Auto Reclosing power supply protector , you can rest assured to enjoy the safety and convenience brought by automatic reclosing leakage protection..
Package List:
1 x Leakage Protection Switch
