Description：
Material: PP+Stainless Steel
Power: 2000W / 3000W
Rated voltage: 220V - 250V
Rated frequency: 50 （Hz）
Type: Normal / Timer
Normal Model:
Automatically stops heating when the water temperature reaches 70℃ (158℉).
It will automatically start heating when the water temperature drops below 40℃ (104℉).
Timer Model:
Within the set time, the heater will automatically start heating and stop heating(the same as the basic mode).
When the timing is over, the heater will completely stop working.
Secure Timer Mechanism: No more worrying about overheating or forgetting that the water is heating.
1. How to set the time for the first time:
First, long press [Set] button for 5 seconds, when red number flashes, set up the targeted time via [+] and [-] buttons, successively press [Set] button to confirm, and then the indicator light will be on, the heater will start to heating.
2. No need to reset the time next time:
The timer has memory function. When using it next time, short press [Set] to quickly start the last used setting.
3. [Set] button is also an ON/OFF switch.
You can shut off or turn on by short press [Set] button at any time.
POWER LIGHT INDICATOR
Plug the heater into the socket. The red light will illuminate,and amallbubbles will rise out of the vent holes,indicating that the heater is heating. Do not touch the water with the rodwhile it is still in the water.
THICKER COPPER WIRE
Our immersion water heater includes a standard,thick 3-wire grounding plug and a high-quality copper cord that has been thickened. This construction enables an increased power capacity,resulting in a safer product for use.
Adopt the high quality copper power cord in thicken design to carry more electricity without causing overheating, smoke or fire, adds more security while using.
REMOVABLE GUARD FOR EASY CLEANING
Calcium naturally builds up on the internal heating elements.This is not rust.Remove the guard to clean the element.Stainless steel case can be removed by rotating firmly.
Use Method And Precautions
1. After the container is filled with Water, put the Immersion Water Heater in water to ensure that all products are in water
2. Make sure that the hands and plug parts are dry and turn on the power
3. When the water temperature reaches your expectation, you can cut off the power and take it out after 30 seconds
4. It is strictly prohibited to use in the case of no water or little water. It can only be used for water heating
Steel balls can help you remove dirt from the surface of the Immersion Water Heater more easily, so that it can work for longer times
️Warnings Tips:️
️1. Do not heat while using water and the plug must be disconnected to use water. Please not to touch water while in use
️2. The protection plug of leakage is not a power switch. Make sure the water level is enough before use.
️3. Read the instructions carefully before you use the water heater
Package Included:
1 x Electric Water Heater
1 x Us
Rambursare în caz de nelivrare
